Skip to content
Troubleshooting

A bad smell is coming from my washer drum

Home Nura guide — category: Smart Washers & Dryers

Severity: minor

Diagnosis

This symptom is common and usually harmless. Most of the time, a targeted cleaning or a small change in how you use the device fixes it in under 10 minutes.

What to do

Unplug the device, let it cool down, then clean the affected part with warm water and mild dish soap (never an abrasive scrubber on nonstick coatings). Put it back together, plug it in and run a short empty cycle to make sure it works.

Back to category — Smart Washers & Dryers

Other common problems in this category

These issues affect the same type of appliance — each one comes with a diagnosis and the steps to take.

F · A · Q

Frequently asked questions

Check the manufacturer's warranty first: how long it lasts and what it covers vary by brand and model, so read the terms for yours and keep your proof of purchase. If you bought it new in the EU, a two-year legal guarantee also applies (Directive (EU) 2019/771), covering defects present at delivery, whenever they first show up.

If you're still within the seller's return window, a return or exchange is usually the fastest fix. After that, go through the manufacturer's support team: it handles warranty claims and can often repair the unit even after the warranty has run out. Either way, keep your proof of purchase.

Our public methodology lowers the Nura Score /10 of any model in our Smart Washers & Dryers guide whose recurring failures show up in owner reviews. A model that breaks down too often never makes it to the top, whatever the brand.

Generally, yes, if you stick to routine maintenance: cleaning, replacing a gasket, recalibrating. Irreversible changes to the hardware are what can cause problems, so read your warranty terms before you open anything up. Anything the manufacturer's manual walks you through is the safe zone.

Your proof of purchase, the exact model name and a record of the symptom: photos, a short video, the sound it makes and any error code. Note when the problem started and what you've already tried. With all that in hand, support can pin down the problem much faster.