Best Smart Motion Sensor 2026: Comparison, Value Tiers and PIR vs mmWave

For most homes, the best smart motion sensor in 2026 is the Aqara Motion and Light Sensor P2: a battery-powered infrared (PIR) sensor that runs on Matter over Thread, has a built-in light sensor and is rated for up to two years of battery life. If you need to know that someone is still in the room even when they sit perfectly still, step up to an mmWave radar presence sensor such as the Aqara Presence Sensor FP2; and if what you really want is a burglar alarm, an alarm-grade detector like the Ajax MotionProtect is the safer choice.

This comparison is based on manufacturer specifications, published independent reviews and verified buyer feedback. It covers six models sold in Europe, explains the difference between motion detection and presence detection, and compares sensors by value tier rather than by price tag, since prices move constantly while the trade-offs at each level do not. You can also browse our full selection of motion sensors.

PIR motion sensor or mmWave presence sensor: the real difference

This is the question that drives every other decision. The two technologies solve different problems.

• PIR (passive infrared) picks up changes in heat as a body crosses its field of view. It uses very little power, which is why PIR sensors can run on batteries for months or years. The catch: it only sees movement. Someone sitting still at a desk or reading on the sofa eventually "disappears", and the lights go off.
• mmWave (millimetre-wave) radar detects tiny movements, down to breathing. It therefore knows a room is occupied, even when nobody moves. Some models track several people and split a room into zones. The trade-off is power: most mmWave sensors must stay plugged in (USB-C).

In practice, a PIR sensor is enough for hallways, entrances, stairs, toilets or a garage, where people just pass through. An mmWave presence sensor earns its place in a home office, living room, bathroom or bedroom, where people stay put for long periods.

How to choose: the buying criteria

1. Protocol and ecosystem

A sensor never works on its own: it triggers a light, a notification or a siren through an ecosystem. The main options are Matter over Thread (works across Apple Home, Google Home, Amazon Alexa and SmartThings, but needs a Thread border router), Zigbee (reliable but tied to a bridge such as the Hue Bridge or IKEA's Dirigera hub), Wi-Fi (no hub, but rarely compatible with battery power) and Bluetooth. Alarm systems such as Ajax use their own proprietary radio. For a primer on these standards, read our Matter and Thread guide.

2. Battery life and power

Battery PIR sensors are rated from one to five years depending on the model, how often they trigger and the protocol. Longer battery life means fewer trips up a ladder. mmWave sensors need a socket nearby, so plan the location accordingly.

3. Light (lux) sensor

Essential for lighting automations: it stops a lamp from switching on in broad daylight. Most recent models include one, with varying accuracy. To tell whether a room is light or dark, even a rough sensor is enough.

4. Pet immunity

Often overlooked. A lighting sensor will react to a cat or dog, which rarely matters. For an alarm, it is a deal-breaker: you need a detector designed to ignore animals up to a given weight and height. Few consumer sensors claim this; alarm-grade detectors do.

5. Range, angle and ingress protection

Expect 5 to 12 metres of range and 90 to 170 degrees of coverage depending on the model. For outdoor use or a bathroom, check the IP rating: IPX3 handles rain under cover, IP67 copes with exposed outdoor spots.

The 6 best motion and presence sensors in 2026

1. Aqara Motion and Light Sensor P2 — best overall

The P2 pairs a wide-angle PIR sensor with a separate light sensor. Aqara quotes detection up to 7 metres across 170 degrees horizontally, enough to cover a whole room from a corner. It runs on Matter over Thread, so it works with Apple Home, Google Home, Alexa or SmartThings without an Aqara hub, as long as you have a Thread border router (Apple TV, HomePod mini, recent Nest Hub, some Echo devices…). It is powered by two CR2450 coin cells, with battery life rated up to two years.

Strengths: very wide detection angle, native Matter, good battery life, discreet design.
Limitations: PIR only (won't detect someone sitting still), no claimed pet immunity, Thread border router required.
Best for: anyone automating lights in a hallway, entrance or kitchen without being locked into one ecosystem.

2. Aqara Presence Sensor FP2 — best presence sensor

The FP2 uses mmWave radar sensitive enough to pick up very small movements, including breathing. It covers up to 40 m², can divide a room into 30 zones, track up to five people at once and includes a light sensor. It connects over 2.4 GHz Wi-Fi, works with Apple Home, Alexa, Google Home and Home Assistant without a hub, and is powered over USB-C. Its IPX5 rating makes it suitable for a bathroom. Aqara also offers a fall-detection mode when the sensor is ceiling-mounted.

Strengths: true presence detection, multiple zones, multi-person tracking, no batteries to change.
Limitations: must stay plugged in, zone set-up takes longer than a basic sensor, premium tier.
Best for: home offices, living rooms, bathrooms, or any room where the lights must not switch off while you read.

3. Philips Hue Motion Sensor — easiest in the Hue world

Philips Hue's indoor motion sensor is still the default pick if you already own Hue bulbs. It runs on Zigbee through the Hue Bridge, detects up to 5 metres across 120 degrees, includes a daylight sensor and also reports temperature. It takes two AAA batteries, with battery life rated at around two years. The Hue app makes it easy to set different scenes by time of day (dimmed light at night, for instance).

Strengths: seamless with Hue lighting, very simple day/night settings, standard batteries.
Limitations: Hue Bridge required, indoor only, shorter range than the P2.
Best for: homes already using Philips Hue that want a set-and-forget solution.

4. IKEA MYGGSPRAY — best value

The MYGGSPRAY is part of IKEA's new Matter range. It is a PIR sensor running Matter over Thread, with a light sensor, powered by two AAA batteries (IKEA recommends its LADDA rechargeables). It is IP67-rated, so it works indoors and outdoors. It pairs with IKEA's Dirigera hub, and also with Apple, Google, Amazon, Homey or SmartThings through a Thread border router. Published independent reviews report frontal detection of roughly 7 to 8 metres and a light sensor that is not very accurate, though good enough to tell day from night.

Strengths: entry-level tier, Matter, IP67, standard rechargeable batteries.
Limitations: rough light readings, Thread connection reported as occasionally finicky, PIR only.
Best for: kitting out several rooms or an outdoor area on a tight budget. Its predecessor, the IKEA VALLHORN (Zigbee, IP44), remains an option for Dirigera users.

5. Eve Motion — the Apple Home pick, indoors or sheltered outdoors

The Eve Motion runs on Matter over Thread, includes a light sensor and is IPX3-certified, so it can go outside in a sheltered spot (under a porch roof, by a door). Eve quotes a 120-degree field of view and up to 9 metres of range when mounted at 2 metres. It runs on two AAA batteries and can stand freely or be wall-mounted. Like all Eve products, it works locally, with no cloud account.

Strengths: good range, sheltered outdoor use, local operation that respects privacy.
Limitations: mid-to-premium tier, bulkier, Thread border router required.
Best for: Apple Home users who want a dependable sensor for an entrance, covered terrace or garage.

6. Ajax MotionProtect — alarm-grade detector

A different category altogether: the MotionProtect is an intrusion detector built for Ajax alarm systems. It ignores pets up to 20 kg and 50 cm tall, detects up to 12 metres and is rated for up to five years on the supplied batteries. It talks to the hub over Ajax's encrypted Jeweller radio, with a quoted range of up to 1,700 metres in open space. The current version complies with EN 50131 Grade 2, the European benchmark for residential alarms.

Strengths: pet immunity, EN 50131 compliance, high reliability and battery life, secure radio.
Limitations: requires an Ajax hub, no light sensor, poorly suited to lighting automations.
Best for: anyone who wants a serious alarm, especially with pets at home. See also our guide to home alarms without a subscription.

Other options worth knowing: the Shelly BLU Motion (Bluetooth, CR2477 cell rated up to five years, light sensor) fits neatly into an existing Shelly set-up; the SONOFF SNZB-06P is a Zigbee 3.0 radar presence sensor powered over USB-C, popular with Home Assistant users.

Comparison table

Value tiers: what you get at each level

Rather than a price list, here is what each tier actually buys you, which is what matters when comparing motion sensors.

• Entry-level (IKEA MYGGSPRAY, Shelly BLU Motion): ideal for scattering sensors across pass-through spaces. You accept less accurate light readings and fewer settings. The lowest cost per room by a clear margin.
• Mid-range (Aqara P2, Philips Hue, Eve Motion): the best balance of range, battery life, build quality and integration. This is where the best value sits for lighting automations.
• Premium (Aqara FP2, Ajax MotionProtect): you pay for one specific capability, either true presence detection or alarm compliance. Reserve them for rooms or uses that need it; with Ajax, also budget for the hub.

A practical rule: if a room only needs lights on when someone walks in, an entry-level or mid-range PIR does the job. Spend more only where a cheaper sensor would genuinely fail, such as a home office (presence) or a home with pets and an alarm (pet immunity).

Mistakes to avoid

• Using a PIR in an office or living room: the lights will switch off while you work. Choose an mmWave sensor, or set a much longer switch-off delay.
• Forgetting the Thread border router: a Matter over Thread sensor does not connect directly to Wi-Fi. Check you have a compatible border router.
• Confusing automation with an alarm: a lighting sensor can send a notification, but it is neither certified nor designed to resist tampering. To protect a home, choose an EN 50131-compliant detector.
• Pointing the sensor at a heat source or window: radiators, direct sun or air vents cause false triggers with PIR.
• Ignoring pets: without pet immunity, a dog or cat will set off an alarm every time it walks by.

Installation and usage tips

A PIR sensor detects movement across its field better than movement heading straight at it: mount it to the side of the walkway, ideally in a room corner, at 2 to 2.5 metres. An mmWave sensor goes on a wall or ceiling depending on the features you want (the FP2's fall detection requires ceiling mounting) and should avoid moving objects such as fans or curtains. Check the covered area in the app before fixing the mount permanently.

On privacy and safety, a radar presence sensor records nothing: it transmits no image or sound, which makes it acceptable in a bedroom or bathroom. Fall detection can be a helpful extra for an older person, but it does not replace a personal alarm service. Finally, these sensors run on batteries or USB, so no work on your mains wiring is needed.

To go further, read our smart home security guide.

Verdict

For automating lights in most rooms, the Aqara Motion and Light Sensor P2 is the best all-round choice: wide angle, Matter, light sensor and long battery life. On a tight budget or outdoors, the IKEA MYGGSPRAY covers the essentials. Where people stay still for long periods, the Aqara Presence Sensor FP2 genuinely transforms the experience thanks to radar. Hue households should stick with the Philips Hue Motion Sensor, Apple Home users will like the Eve Motion, and for an alarm in a home with pets, the Ajax MotionProtect remains the benchmark.